Welcome to the UCLA Computer Aided Design and Manufacturing Laboratory

Engineering IV. 38-138, 420 Westwood Plaza, Los Angeles, CA 90024
310-825-7821
Professor Daniel C. H. Yang's Publication
  1. Han, Z. and Yang, D.C.H., “Optimal Tool Selection for Interference-Free Sculptured Surface Machining,” Intl. Conf. On Sculptured Surface Machining, Chrysler Technology Center , Michigan , 1998.
  2. Han, Z. and Yang, D.C.H., “Iso-Phote Based Machining for Feature Intensive surfaces,” Proceeding of Symposium on Concurrent Design of Product and Manufacturing Processes, pp. 1-13, 1998 ASME IMECE, Nov. 15-20, Anaheim, CA.
  3. Yang, D.C.H. and Han, Z., “Iso-Phote Based NC Machining for CAD/CAM Integration”, Poster Session, 1999 NSF Design and Manufacturing Grantee Conference, Jan. 5-8, Queen Mary, Long Beach , CA .
  4. Han, Z. and Yang, D.C.H., “Iso-Photo Based Tool-Path Generation for Machining Free-Form Surfaces” The Trans. of ASME J. of Manufacturing Science and Engineering, vol.121, pp. 656-664, Nov. 1999.
  5. Yang, D.C.H. and Han, Z., “Interference Detection and Optimal Tool Selection in 3-axis NC Machining of Free-form Surfaces,” CAD, Computer Aided Design, Vol. 31, No. 5, pp. 303-351, April 1999.
  6. Yang, D.C.H., Chuang, J.J., Han, Z., and Ding, S., “Boundary Conformed Tool-path Generation for Trimmed Free-Form Surfaces via Coons Reparametrization,” IMCC’2000, Aug. 16-17, Hong Kong .
  7. Han, Z., Yang, D.C.H., and Chuang, J.J., “Iso-Phote Based Ruled Surface Approximation of Free-Form Surfaces and Its Application to NC Machining,” the Intl. J. of Production Research, Vol.39, No. 9, pp. 1911-1930, 2001.
  8. Han, Z., and Yang, D.C.H., “Optimal tool Selection for Interference – Free Sculptured Surface Machining”, in book: Machining Impossible Shapes, edited by Olling, Choi and Jerard, Kluwer Academic Publishers, pp. 247-262, 1999.
  9. Han, Z., Yang, D.C.H., and Chuang, J.J., “Iso-phote Based Ruled Surface Approximation of Free-Form Surfaces and Its Application in NC Machining”, The Intl. J. of Production Research, Vol. 39, No. 9, pp. 1911-1930, 2001.
  10. Yang, D.C.H., “Iso-Phote Based NC Machininf for CAD/CAM Integration”, 2001 NSF Design, Manufacturing and Industrial Innovation Research Conference, Tampa , Florida , Jan. 7-10.
  11. Yang, D.C.H., Chuang, J.J., Han, Z., and Ding, S., “Boundary Conformed Toolpath Generation for Trimmed Freeform Surfaces via Coons Reparametrization”, J. of Material Processing Technology Vol. 138, Issue 1-3, 20 July, 2003, pp. 138-144.
  12. Yang, D.C.H., Chuang, J.J., and Oulee, T.H., “Boundary-Conformed Toolpath Generation for Trimmed Freeform Surfaces”, Proceeding of the JSME/ASME Intl. Conf. On Material Processing, Vol. 2, pp. 101-106, Oct. 2002, Hawaii .
  13. Yang, D.C.H. and Tong, S.H., “A Deviation-Function Method for the Design of New Conjugate Kinematic Pairs’” Paper No. DETC98/Mech-5828, 1998 ASME Sedign Engineering Technical Conference, Sept. 13-16, Atlanta , GA.
  14. Tong, S.H. and Yang, D.C.H., “On the Generation of Identical Non-Circular Pitch Curves,” Paper No. DETC98/Mech-5229, 1998 ASME Design Engr. Technical Conference, Sept. 13-16, Atlanta , GA.
  15. Tong, S.H. and Yang, D.C.H., "Generation of Identical Noncircular Pitch Curves," ASME Trans. J. of Mechanical Design, Vol. 120, June, pp. 337-341, 1998.
  16. Yang, D.C.H. and Tong, S.H., “Design of New Conjugate Kinematic Pairs – Theory and Application” Poster Session, 1999 NSF Design and Manufacturing Grantee Conference, Jan. 5-8, Queen Mary, Long Beach, CA.
  17. Liu, H.C., Tong, S.H., and Yang, D.C.H., “Design of New Rotors for Trapping-Free and High-Sealing Lobe Pumps,” 1998 ASME Intl. Design Engr. Technical Conference, Sept. 12-16, 1999, Las Vegas , Nevada .
  18. Yang, D.C.H., Tong. S.H., and Lin, Q., “Deviation-Function Based Design of New Conjugate Kinematic Pairs,” ASME Trans. J. of Mechanical Design, Vol. 121, pp. 579-586, Dec 1999.
  19. Tong, S.H. and Yang, D.C.H., “On the Generation of New Lobe Pumps for Higher Pumping Flowrate,” Mechanism and Machine Theory, 35, 2000, pp.997-1012.
  20. Liu, H.C., Tong, S.H., and Yang, D.C.H., “Trapping-Free Rotors for High-Sealing Lobe Pumps,” The Trans. of ASME J. of Mechanical Design, Vol. 122, pp. 536-542, Dec. 2000.
  21. Yang, D.C.H., “Design of New Conjugate Kinematic Pairs – Theory and Application”, 2001 NSF Design, Manufacturing and Industrial Innovation Research Conference, Tampa , Florida , Jan. 7-10.
  22. Yeh, T., Yang, D.C.H., and Tong, S.H., “Design of New Tooth Profiles for High-Load Capacity Gears”, Mechanism and Machine Theory, 36(2001) 1105-1120.
  23. Yang, D.C.H. and Tong, S.H., “Specific Flowrate of Deviation-Function Based Lobe Pumps – Derivation and Analysis”, Mechanism and Machine Theory, Vol. 37, (10), Oct. 2002, pp. 1025-1042.
  24. Yang, D.C.H. and Tong, S.H., "Specific Flowrate of Deviation--Function Based Lobe Pumps—Derivation and Analysis," J. of Mechanism and Machine Theory 37(10), 1025–1042, 2002.
  25. Yang, D.C.H., Chuang, J.J., and Oulee, T.H., "Boundary-Conformed Toolpath Generation for Trimmed Freeform Surfaces," Computer-Aided Design 35(2), 127–139, 2003.
  26. Yang, D.C.H., Chuang, J.J., Han, Z., and Ding, S., "Boundary Conformed Toolpath Generation for Trimmed Freeform Surfaces via Coons Reparameterization," J. of Material Processing Technology 138(1–3), 138–144, 2003.
  27. Chuang, J.J. and Yang, D.C.H.,"A Smooth Boundary-Blending Method for 2D Surface Parametrization," ASME J. of Mechanical Design 126, 327–335, 2004.
© CAD Lab 2004